3 Backlash Levels, only 3 arc-min
IP65 environment protection
Motor adaptors for any servo electric motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next generation cycloidal speed reducer. It utilizes 52100 grade bearing metal on most of its speed reduction components. It really is offered with a complete two year warranty, not limited by hours of procedure, and can endure abuse that could break the teeth of ordinary quickness reducers.
The EP 3000, readily available with inputs for both servo and induction motors, includes a compact style with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Offered in two backlash rankings and multiple mounting choices, the EP 3000 includes a design tough enough for both servo and regular induction electric motor applications. The initial two piece pin housing design guarantees output shaft backlash ratings of significantly less than 6 arc-min.
The EP provides a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows an application to reach negligible backlash, maintain extraordinary rigidity, and increase control stability to ensure that the desired output motion can be easily achieved. The look is truly a distinctive concept, employing a full contact screw-like tranny for high performance and elimination of wear. The unit provides optimum compactness using orthogonal axes and contains a big hollow shaft for versatility.
WORM SERVO GEAR REDUCER
Wide range of servo gearboxes, made to fit virtually all servo motors on the market
Designed for the best torsional stiffness and the cheapest angular backlash, meant for the maximum torque and overhung loads
Bush with slots and hub clamp for servomotor coupling
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The right technical solution because of a comprehensive selection of sizes, gear stages, transmission ratios, designs and non-standard designs.
Servo gear reducers (worm, coaxial, helical and bevel helical units) Catalog SR
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the expansion of our range of Servo Reducers, today offering five degrees of precision to meet any app requirements. The five degrees of precision available allows a machine developer to select the mandatory reducer precision to meet their requirements and their budget. They can be purchased in both in-series and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Usual applications for these reducers include rotary & linear axis drives, and material handling axis drives. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The mounting faces of the HT, HP, Electronic and B versions are identical, making it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of engine couplings and mounting flanges are for sale to the complete reducer range to mount virtually any servo electric motor and the hollow bore output can be used to attach output shafts, pinion shafts, or other drive elements.
These reducers are typically selected predicated on the peak cycle forces, which often happen during accelerations and decelerations. These cycle forces rely on the powered load, the quickness vs. period profile for the cycle, and any other external forces acting on the axis. For more selection info, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. The application information will be reviewed by our engineers, who’ll recommend the best solution for your application.
EP Inc. offers a full range of modular servo gearboxes /worm reducers. The modular style allows for configurations with motor insight flange and output pinion for rack and pinion drives, in addition to solid result shafts, Hollow bore output, and input shafts for all the positioning applications. The modular design allows for universal mounting of the gearbox in virtually any orientation.
They can be utilized on motors with a NEMA23 standard flange through an adaptor package. As the gears are naturally angled, they result in a short total amount of the electric motor and its gear.
The series may also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole can also be constructed on the gear’s output side.
Built with a simple and robust style, the series has gearing ratios that range between 6:1 to 75:1. The user can also customize the materials through the order, in order to match the gear to its intended app.
The Precision Planetary Gears of the EPRG series contains a thorough selection of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models likewise incorporate versions with double shaft, right position shaft and right position output, in addition to a full selection of adapters for engine mounting, making them capable of meeting certain requirements of also the most varied applications. They are made for use with integrated servo and stepper EP motors, mounted straight or via adaptor flanges, but may also be used in combination with other EP engine types. This range of products is founded on years of experience and represents the end result of a decade-long study targeted at improving performance.
Maximum precision and dynamics, combined with extraordinary torque density, will be the key requirements specific for reliable servo gearboxes in practice. EP provides servo gearboxes for any application and any functionality range. Our low-backlash planetary and right-position gearboxes reflect our enthusiasm for creativity and the best levels of precision.
Worm gear reducers provide market progress solution with performance and flexibility. Low quantity of basic models could be applied to a wide range of power ratings guaranteeing top performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical gear. When the motor swiftness needs to be reduced, the result torque increases and send torque totally to the application form. We believe that clients will appreciate our equipment reducer to accomplish their demand. Just go to EP, you can find more information about servo gearheads, servo gearboxes, and equipment reducers. We always keep going forward for your support.
Plug the Speed Reducer into the desired channel of your receiver, and connect the business lead from your servo (or servo wye) into the male servo lead from the circuit table. The established screw on the blue trim pot, located near the top of the primary circuit board, can be used to control the rate of the servo. Switch the set screw fully clockwise (CW) for regular servo speed without speed reduction, completely counter-clockwise (CCW) for optimum speed reduction, or any place in between for partial acceleration reduction. The reddish LED indicates three feasible conditions: Slow Blinking = No Transmission; Solid On = No Rate Decrease; Fast Blinking = Reduced Swiftness Setting
Please note that if you make any alter to the speed setting as the receiver is on, you must cycle power to the receiver (convert if off and back again on) for the new speed establishing to take impact. This circuit can also be used in conjunction with this Servo Reverser to trigger flap or retract servos to carefully turn in reverse directions for appropriate function. Instructions are included for easy set up and use.
IMPORTANT NOTE: This product will only work on a normal, proportional servo. You won’t focus on a retract-type servo, as they do not acknowledge any servo positions apart from clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, even by a transmitter that includes this function, as their design and electronics don’t allow it. Examine the FAQ page to find out more.
This device will reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you intend to control for a far more scale-like movement of flaps or retracts. Adjustable, it can be set to lessen the swiftness of your servo from super-slow movement to no speed reduction at all, with an nearly infinite amount of positions in between. Maximum reduction period for a servo to visit 90 degrees is about 14 seconds, minimum period (no reduction) is simply the normal speed of the servo. Great for reducing or eliminating the inclination of a plane to “balloon up” when flaps are deployed. It can be utilized to control several servo by utilization of a normal servo Y.
This is actually the new regulated version that can be used on radio systems powered by any size or type of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Existence batteries. This unit won’t reduce the voltage likely to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as packaging machines, gantries, injection molding machines, pick and place, and linear slides.Provided in concentric shaft, right angle solid shaft, and correct angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to easily mount to any kind of manufacturer’s servo electric motor. The EP Series helical gears have slanted teeth in comparison to spur gears with directly cut teeth, producing a smoother equipment mesh, yielding significantly lower noise levels.
The reduced backlash EP planetary servo gear units are made for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the best possible flexibility and cost-efficiency because not every application requires high-performance parts.
They provide a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units are available in the following versions:
PSC = B5 output, simple output shaft
PSKC = B5 result, with keyway
PSCZ = B14, output, smooth output shaft
PSKCZ = B14 result, with keyway
Would you such as to improve your knowledge pertaining to servo gear reducer?